X

Lumen help

Configuring your Cisco SPA122 ATA

Follow the instructions below to configure the profile rule for your Cisco SPA122 ATA (analog termination adapter). It has two analog FXS ports.

Important: The Cisco SPA122 has been discontinued. Use this article for configuring your existing equipment. If you need a replacement or additional ATA, contact Lumen. Lumen also uses the Cisco SPA3012 ATA.

To configure your Cisco SPA122 ATA:

  1. Connect your laptop/PC to the ATA (yellow port) using an Ethernet cable.
  1. In a web browser, type 192.168.0.1 in the URL field.
  1. Type the following credentials:

    • User Name: user
    • Password: admin

Note: If the credentials above don't work, contact your previous service provider or the company you purchased the device(s) from to obtain the password.

  1. Click Voice > Provisioning > Profile Rule.
  1. Copy and paste the following URL: http://xsp1.ctlvoice.com/dms/Cisco122/$MA_SPA122.xml
  1. Click Submit, then reboot the device.